Fastcal 3000BB

Fastcal 3000 Black Body

Fastcal 3000BB

High Temperature Black Body Furnace
FastCAL 3000 is a high temperature blackbody source with a capacity to produce high temperature using high emissivity emitter (graphite tube) and at the same time stabilize at the required temperature within a few minutes.


It is mainly used to calibrate non-contact temperature sensors. A step change in temperature is achievable within seconds. The graphite tube has an emitter diameter of 25mm (1.00″) and an emissivity of +0.99. The target temperature is sensed by a non-contact temperature sensor/Pyrometer which gives feedback to the PID controller to regulate the cavity temperature precisely to the desired set points. The remote set point is achieved via the RS-232 C communication port. All safety features to protect equipment and operator are easily accessible.

Safety Interlock Features

The system will switch off in case of:

  • Water flow failure
  • Increase in water temperature
  • Argon gas flow failure
  • Over Current

Model Details

ModelFastcal 3000
Temperature Range600°C to 3000°C
Temperature Resolution0.1°C
Purge GasArgon gas flow with 7-10 LPM respective
Controlling SensorPyrometer
Method of ControlPID controller Eurotherm make 3504 (Option – HMI & Data Logging)
Heating TimeApprox 5 Minute from 500 to 2700°C
Ambient Temperature10°C to 50°C
Power Requirement440V,Single Phase AC 50/60 Hz 50 KW
Dimensions1700mm(H) x 900mm(W) x 1200mm(D)
CavityGraphite Dual cavity blackbody, one cavity is control and one cavity for measurement
Heating Aperture25mm
Weight300 Kg

Send us your Enquiry’s / Feedback’s

Enquiry For: Fastcal 3000BB

Skip to content